▶ 연료용펌프 : GFS,GF,GFK,GFL,GFH,GD
 
GFS 
(for kerosene and heavy oil A)
 
*Specially designed for small burners.
The pumps are available in two types; one with a 2-hole flange (GFS-A)  
   and the other without a flange (GFS B). Set screws are used for installation
   of the latter.  We also manufacture a less expensive GFS-D pump that does
   not include a cut-off valve.
The valve, having an innovative structure (patent pending), prevents troubles
   caused by rust and scale.
The starting torque of 10 N-m or less allows for use of energy saving motor.
 
Model Pressure MPa Discharge capacity (L/h) (2,900min-1)
GFS
0.7~1.2
35~20
 
 
 
 연료용펌프 : GF
GF
(for kerosene and heavy oil A)
 
*There are three models in terms of discharge capacity.  Each model is
subdivided, into nine models in total, depending on the shaft shape and
   other factors.  Please contact us for the best selection of pumps to your
   application.
The pumps are designed to deal with the Japanese kerosene that is poor
   in lubrication properties. The pumps are made of special materials
   featuring excellent durability, thereby ensuring a very long service life.
 
Model Pressure MPa Discharge capacity (L/h) (2,900min-1)
GF
0.7~1.4
100~25
 
 
 
 연료용펌프 : GFK
GFK
(for kerosene and heavy oil A)
 
There are two models in terms of discharge capacity.  They are
   designed to operate under the same conditions as GF pumps but
   in larger capacity. 
 
Model Pressure MPa Discharge capacity (L/h) (2,900min-1)
GFK
0.7~2.0
180~110
 
     
 
 연료용펌프 : GFL
GFL
(for kerosene and heavy oil A)
 
There are three models in terms of discharge capacity.
 This pump has been developed to meet heavy oil pollution contro 
    l requirements. To withstand 2.0 MPa high pressure even when Japanese
     kerosene under very unfavorable conditions is used, the pump is designed
    in a two-stage structure. It is a large capacity pump for low viscosity
    boasting the world's highest reliability when Japanese kerosene is used.
 
Model Pressure MPa Discharge capacity (L/h) (2,900min-1)
GFL
0.7~2.0
450~200
 
     
 
 연료용펌프 : GFH
GFH
(for heavy oil B and C)
 
 There are four models in terms of discharge capacity ranging from
    2.0 L/h (1,450 rpm and 1.5MPa) to 230 L/h (2,900 rpm and 1.5MPa). Each
    model is subdivided, into seven models in total, depending on the shaft
    shape.
 
Model Pressure MPa Discharge capacity (L/h) (2,900min-1)
GFH
1.0~2.5
230~40
 
     
 
 연료용펌프 : GD
GD
(for kerosene and heavy oil A, B, C)
 
 There are six models each for kerosene and heavy oil in terms of
    discharge capacity.
  The pumps have a two-stage design to withstand a high pressure
    (4.0 MPa for heavy oil and 2.0 MPa for kerosene) and to accommodate
       a large capacity (125-860 L/h for heavy oil and 60-760 L/h for kerosene).
 The pumps are designed to allow for easy pressure adjustment without tools.
 The pumps for kerosene and heavy oil are made of different materials,
     therefore they are not interchangeable for use with these fuels.
 
Model Pressure MPa Discharge capacity (L/h) (2,900min-1)
GD
0~2.0
760~60
 
 
 연료용펌프 : GFD
GFD
 
Motor specifications)
 Type: Drip-proof protected type 3-phase induction motor
    Output: 400 W
    Duty Cycle: Continuous 
    Number of poles: 2P
    Voltage: 200/200/220
    Frequency: 50/60/60 Hz
    Insulation class: E
 
Model Pump Model Max. used pressure
TOP-GFM-400-GFS-*** GFS-VA
GFS-VEA
1.2MPa
1.8MPa
TOP-GFM-400-GFY-*** GFY-V1~V3 1.4MPa
TOP-GFM-400-GF-*** GFKY-V4~V5
GFH-V2~V3
GFH-V4~V5
2.0MPa
2.5MPa
1.8MPa
TOP-GFM-400-GFLY-*** GFLY-V6
GFLY-V8
1.8MPa
0.8MPa
 Models GF, GFKY, GFH, and GFLY with a motor output of 0.75 kW are also
    available.